EDR4RXD1 Kitchenaid EveryDrop® Refrigerator Water Filter 4

1. Unplug your refrigerator from the power source before beginning.

2. Locate the filter compartment, which is usually at the top, back, or bottom-right portion of the refrigerator.

3. Remove the filter cap by either rotating it counterclockwise or pulling it off.

4. Pull out the used filter.

5. Take the new EDR4RXD1 Whirlpool Refrigerator Ice and Water Filter 4 and remove the plastic wrap.

6. Insert the new filter into the cap and twist it clockwise until it is secure.

7. Replace the filter cap and turn it clockwise to lock it in place.

8. Plug your refrigerator back into the power source.

9. Flush the water filter for 3 minutes before using it.

10. Reset the “change filter” light on your refrigerator if necessary.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available.